|
|
|
|
|
|
|
|
|
|
PT-730 12 VOLT DIAPHRAGM HYDRANT PUMP
Another innovative idea from C.A.Turner The all new Diaphragm Hydrant Pump. The first pump specifically designed to answer troubling "in the field" problems common to other pumps.
No Impeller to burn out and no priming needed. Simply attach the spring loaded battery clamps to any truck battery--hook up the Quick Coupled Suction hose--turn the pump on and lower the hose end into the hydrant. NO need to worry about picking up debris because this pump has a built in SEE THRU strainer that captures any objects that may block the suction of the pump. The operator can remove the strainer screen without any tools and clean it on the spot.
If you pump HYDRANTS-METER PITS-VALVE BOXES we know you'll agree with hundreds of other satisfied customers who praise these fine pumps.
FEATURE PACKED!!!
NO PRIMING NEEDED-DRY SUCTION UP TO 8 FEET
SEE-THRU STRAINER WITH STAINLESS STEEL SCREEN
12' SUPER LOW TEMPERATURE SUCTION HOSE WITH QUICK COUPLINGS-NO THREADING
BOARD MOUNTED ON/OFF SWITCH
FUSE PROTECTED
BUILT IN PULSATION DAMPENER-RUBBER MOUNTED FEET FOR LOW VIBRATION
MOUNTED IN ITS OWN CARRY CASE FOR STORAGE AND PROTECTION
SUCTION HOSE AND WIRES STORE INSIDE AFTER USE
| Open Flow |
3 GPM |
| Dry Suction Lift | 6.5 feet |
| Port-Discharge side | 3/4" barbed |
| Weight | 13 Lbs. |
| Current Draw | 7 amps |
| Dimensions | 10H x 22L x 9.5W |
|
Order No. PT-730 $ 365.00 |
|
Quantity discounts available, please call 800-228-4032 for the sales department.
Prices effective 8/1/11
