With a Cold-Shot from General, you don't have to drain water lines, sprinkler systems, or hot water systems before cutting pipe or tubing. It keeps a fully pressurized system operating while you make repairs.
The Cold-Shot freezes liquids in steel, copper, cast iron, aluminum and plastic pipes ranging from 1/8" to 2" using liquid carbon dioxide. Dip tube-type COČ cylinders are available from most fire extinguisher suppliers or welding supply houses.
The Cold-Shot works faster than "refrigerator-type" units, is more compact and less expensive. It's faster and uses less COČ than "bag-type" pipe freezers because the freeze head makes a better seal around the pipe and it uses liquid to fill the cups. In five minutes you're ready to go to work on 1/2" copper tubing and just three minutes for cast iron pipe.
Cold-shot is made in the USA and replacement parts are readily available (see below). Note: there must be no flow in the line for this system to freeze the line.
 |
Kit includes 10 sets of freeze heads for 1/8" to 2" lines, two high pressure spiral hoses with injectors, T-distributor, hex head screwdriver for tightening the cups to the line, rubber gloves, goggles and custom formed carry case. |
| Part Number |
Description |
Price |
Click | |
| CST-2 | Freeze Kit complete | $529.00 |
 |
|
| 951810 | Freeze head for 1/8" iron or 1/4" copper | $31.00 |
|
|
| 951910 | Freeze head for 1/4" iron or 3/8" copper | $31.00 |
|
|
| 952010 | Freeze head for 3/8" iron or 1/2" copper | $31.00 |
|
|
| 952110 | Freeze head for 1/2" iron or 3/4" copper | $31.00 |
|
|
| 952210 | Freeze head for 3/4" iron or 1" copper | $34.00 |
|
|
| 952310 | Freeze head for 1" iron or 1 1/4" copper | $34.00 |
|
|
| 952410 | Freeze head for 1 1/4" iron or 1 1/2" copper | $59.00 |
|
|
| 952510 | Freeze head for 1 1/2" iron | $59.00 |
|
|
| 952610 | Freeze head for 2" copper | $64.00 |
|
|
| 952710 | Freeze head for 2" iron | $64.00 |
|
|
| 4 | 953000 | Double nipple | $11.00 |
|
| B | 953210 | Spiral hose with grip and injector (10 ft. extended) | $118.00 |
|
| C | 953222 | Replacement Injector (Comes with filter) | $33.00 |
|
| 6 | 953310 | Spiral hose extension (10 ft. extended) | $51.00 |
|
| A | 953410 | T-distributor for COČ tank | $53.00 |
|
| 953412 | T-distributor for third freeze head | $28.00 |
|
|
| 10 | 953413 | Locking nut | $11.00 |
|
| E | 953415 | Filters, for Injectors (fit in 953 222) 2 per set | $13.00 |
|
| D | 953416 | Filter and ring for T-distributor | $12.00 |
|
Pricing effective 9/1/10
C.A.Turner Co. ,Inc. 6 Marshall St.
Leicester, MA 01524
Tel 800-228-4032 Fax 508-752-5750