Heavy Duty Chain Strainer-Designed for work in tough conditions. This strainer was conceived by water department workers who had a better idea for a strainer used primarily in a mud environment.  The hose and strainer can be removed from the bottom by a backhoe when it gets stuck in the mud- a common occurrence in the water maintenance or construction field.  In addition the actual suction point of the strainer is dropped to within an inch of the bottom . The sides are reinforced with steel bars to give the strainer rigidity even when it's being pounded on the street to get the mud out. 

Available in Round or Square Hole
Available with or without chain.

Safety   The CHAIN STRAINER is designed to save work and reduce the risk of injury when pumping trenches due to water leaks.

◄The strainer is mounted on any standard suction hose. (Fig 1) The 3' chain attached to the strainer  stays in place with the clamp provided.

 When the hose gets stuck in the mud there is no need to shovel by hand or struggle with the hose, simply remove the chain from the clamp (Fig 2) and attach the 3" steel ring to the tooth or hook of your backhoe bucket and remove the hose by pulling directly on the strainer.  No more workers getting stuck in the mud or hurt backs from pulling on the hose.

Order No.	Description	Dimensions	Price
3-158	2" Chain Strainer with Chain	3/8" Round Holes 5" High	70.00
3-158LC	2" Chain Strainer less Chain	3/8" Round Holes 5" High	50.00
3-159	3" Chain Strainer with Chain	3/8" Round Holes 5" High	80.00
3-159LC	3" Chain Strainer less Chain	3/8" Round Holes 5" High	60.00

Strainers less chains are equipped only with the eyebolt

Also available in Square Hole Style add letter "T" to part number (e.g. 3-159-T) or (3-159-T-LC for Square hole less Chain)

C.A.Turner Co.,Inc.  6 Marshall St.  Leicester, MA  01524     Tel 800-228-4032   Fax 508-752-5750